UltraFix™ Installation

Step 1:

Solvent weld a coupling to the spigot end of the Ultra Fix.

Step 2:

Compress the Ultra Fix and use it to mark the section of damaged pipe to remove.

Step 3:
Cut the pipe squarely, clean it, de-burr it and bevel it.
Step 4:

Solvent weld the coupling end of the Ultra Fix to the pipe. Allow to set for 5 minutes (longer if below 60°F).

Step 5:
Solvent weld the socket end of the Ultra Fix to the pipe. 
Step 6:
Allow Joints to cure before pressure testing.