12" Unitized w/Schedule 40 Tee
Installation Notes:
1.) ACME O-Ring sealed threads are to be Finger Tightened and
"Backed Off" one full rotation before installation.
2.) The Swing Joint lay arm is to be installed at an angle between
30 and 45 degrees.
Download: DWG |
 |
| |
|
12" Unitized w/Schedule 80 Tee
Installation Notes:
1.) ACME O-Ring sealed threads are to be Finger Tightened and
"Backed Off" one full rotation before installation.
2.) The Swing Joint lay arm is to be installed at an angle between
30 and 45 degrees.
Download: DWG |
 |
| |
|
12" Unitized w/Service Elbow
Installation Notes:
1.) ACME O-Ring sealed threads are to be Finger Tightened and
"Backed Off" one full rotation before installation.
2.) The Swing Joint lay arm is to be installed at an angle between
30 and 45 degrees.
Download: DWG |
 |
| |
|
12" Unitized w/Tap't™ Coupling
Installation Notes:
1.) ACME O-Ring sealed threads are to be Finger Tightened and
"Backed Off" one full rotation before installation.
2.) The Swing Joint lay arm is to be installed at an angle between
30 and 45 degrees.
Download: DWG |
 |
| |
|
12" Unitized w/Service Tee
Installation Notes:
1.) ACME O-Ring sealed threads are to be Finger Tightened and
"Backed Off" one full rotation before installation.
2.) The Swing Joint lay arm is to be installed at an angle between
30 and 45 degrees.
Download: DWG |
 |
| |
|
18" Unitized w/Schedule 40 Tee
Installation Notes:
1.) ACME O-Ring sealed threads are to be Finger Tightened and
"Backed Off" one full rotation before installation.
2.) The Swing Joint lay arm is to be installed at an angle between
30 and 45 degrees.
Download: DWG |
 |
| |
|
18" Unitized w/Schedule 80 Tee
Installation Notes:
1.) ACME O-Ring sealed threads are to be Finger Tightened and
"Backed Off" one full rotation before installation.
2.) The Swing Joint lay arm is to be installed at an angle between
30 and 45 degrees.
Download: DWG |
 |
| |
|
18" Unitized w/Service Elbow
Installation Notes:
1.) ACME O-Ring sealed threads are to be Finger Tightened and
"Backed Off" one full rotation before installation.
2.) The Swing Joint lay arm is to be installed at an angle between
30 and 45 degrees.
Download: DWG |
 |
| |
|
18" Unitized w/Tap't™ Coupling
Installation Notes:
1.) ACME O-Ring sealed threads are to be Finger Tightened and
"Backed Off" one full rotation before installation.
2.) The Swing Joint lay arm is to be installed at an angle between
30 and 45 degrees.
Download: DWG |
 |
| |
|
18" Unitized w/Service Tee
Installation Notes:
1.) ACME O-Ring sealed threads are to be Finger Tightened and
"Backed Off" one full rotation before installation.
2.) The Swing Joint lay arm is to be installed at an angle between
30 and 45 degrees.
Download: DWG |
 |
| |
|
TripleTop w/Schedule 40 Tee
Installation Notes:
1.) ACME O-Ring sealed threads are to be Finger Tightened and
"Backed Off" one full rotation before installation.
2.) The Swing Joint lay arm is to be installed at an angle between
30 and 45 degrees.
Download: DWG |
 |
| |
|
TripleTop w/Schedule 80 Tee
Installation Notes:
1.) ACME O-Ring sealed threads are to be Finger Tightened and
"Backed Off" one full rotation before installation.
2.) The Swing Joint lay arm is to be installed at an angle between
30 and 45 degrees.
Download: DWG |
 |
| |
|
triple top w/service elbow
Installation Notes:
1.) ACME O-Ring sealed threads are to be Finger Tightened and
"Backed Off" one full rotation before installation.
2.) The Swing Joint lay arm is to be installed at an angle between
30 and 45 degrees.
Download: DWG |
 |
| |
|
tripletop w/tap't™ coupling
Installation Notes:
1.) ACME O-Ring sealed threads are to be Finger Tightened and
"Backed Off" one full rotation before installation.
2.) The Swing Joint lay arm is to be installed at an angle between
30 and 45 degrees.
Download: DWG
|
 |
| |
|
TripleTop w/Service Tee
Installation Notes:
1.) ACME O-Ring sealed threads are to be Finger Tightened and
"Backed Off" one full rotation before installation.
2.) The Swing Joint lay arm is to be installed at an angle between
30 and 45 degrees.
Download: DWG |
 |
| |
|
Service Elbow & ACME Inlet
Installation Notes:
1.) ACME O-Ring sealed threads are to be Finger Tightened and
"Backed Off" one full rotation before installation.
2.) The Swing Joint lay arm is to be installed at an angle between
30 and 45 degrees.
Download: DWG |
 |
| |
|
Tap't™ Coupling & ACME Inlet
Installation Notes:
1.) ACME O-Ring sealed threads are to be Finger Tightened and
"Backed Off" one full rotation before installation.
2.) The Swing Joint lay arm is to be installed at an angle between
30 and 45 degrees.
Download: DWG |
 |
| |
|
Service Tee & ACME Inlet
Installation Notes:
1.) ACME O-Ring sealed threads are to be Finger Tightened and
"Backed Off" one full rotation before installation.
2.) The Swing Joint lay arm is to be installed at an angle between
30 and 45 degrees.
Download: DWG |
 |
| |
|
SnapLok™ installation
Installation Notes:
1.) ACME O-Ring sealed threads are to be Finger Tightened and
"Backed Off" one full rotation before installation.
2.) The Swing Joint lay arm is to be installed at an angle between
30 and 45 degrees.
Download: DWG
|
 |
| |
|
Swing Joint with Wire
Installation Notes:
1.) ACME O-Ring sealed threads are to be Finger Tightened and
"Backed Off" one full rotation before installation.
2.) The Swing Joint lay arm is to be installed at an angle between
30 and 45 degrees.
Download: DWG |
 |
| |
|
Swing Joint with P-Inlet & Tap't Saddle
Installation Notes:
1.) ACME O-Ring sealed threads are to be Finger Tightened and
"Backed Off" one full rotation before installation.
2.) The Swing Joint lay arm is to be installed at an angle between
30 and 45 degrees.
Download: DWG |
 |
| |
|
| |
|