Background Image

Sch40 22 ½° Elbow
Slip x Slip

$0.00 USD

1½”L
     

More Details
Part NoSizeCtn QtyCodeList PriceLayer QtyPallet QtyCartons/PalletUPCAUCC
465015465-0152001/B1$4.9360036001802552877181210025528771819
465020465-02021001/B1$7.1325012501252552876705110025528773233
465025465-0251001/B1$18.59160800802552877182910025528771826
465030465-0303501/B1$28.811005001002552877183610025528771833
465040465-0404401/B1$51.7764320802552877184310025528771840
465060465-0606301/B1$127.801872242552877244410025528772441
465100465-10010191$411.96020202552878759210025528787599
465120465-12012191$651.94015152552878760810025528787605
  • ASTM D-1784 - Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly Vinyl Chloride (CPVC) Compounds
  • MATERIAL - LASCO Schedule 40 Fittings are produced from PVC Type 1, Cell Classification 12454-B. -O-rings are produced from a Buna- N (Nitrile) material
  • LISTINGS - NSF/ANSI Standard 61, Annex G: Drinking Water System Components Weighted average lead content of less than or equal to 0.25% and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) NSF/ANSI Standard 14: Plastics Piping system components and Related Materials. Includes ANSI Standard 61, Annex G
  • Not to be used in the Hot or Cold water distribution system in a dwelling Maximum Service Temperature 140°F
  • Do not use LASCO fittings for compressed air or gases.
  • Do not test PVC piping systems with compressed air or gases.
  • Do not use fittings with liquids not recommended by LASCO
  • Fitting modification voids the warranty.