Background Image

Sch40 Plug
MPT

$0.00 USD

½”L
     

More Details
Part NoSizeCtn QtyCodeList PriceLayer QtyPallet QtyCartons/PalletUPCAUCC
450005450-005½5001/B1$1.932000160003202552871920310025528143142
450007450-007¾5001/B1$2.072000160003202552871921010025528719217
450010450-01015001/B1$3.372000160003202552871922710025528719224
450012450-0122501/B1$3.55100080003202552871923410025528719231
450015450-0152501/B1$3.81100080003202552871924110025528143227
450020450-02021001/B1$4.9140032003202552871925810025528719255
450025450-0251001/B1$6.8340028002802552871377510025528713772
450030450-03031001/B1$10.3530018001802552871378210025528713789
450040450-0404501/B1$23.351509001802552871379910025528713796
  • ASTM D-1784 - Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly Vinyl Chloride (CPVC) Compounds
  • ASTM D-2466 - Socket Type Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40.
  • ASTM F-1970 - Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride)(PVC) or Chlorinated Poly (Vinyl Chloride)(CPVC) systems.
  • MATERIAL - LASCO Schedule 40 Fittings are produced from PVC Type 1, Cell Classification 12454-B. -O-rings are produced from a Buna- N (Nitrile) material
  • LISTINGS - NSF/ANSI Standard 61, Annex G: Drinking Water System Components Weighted average lead content of less than or equal to 0.25% and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) NSF/ANSI Standard 14: Plastics Piping system components and Related Materials. Includes ANSI Standard 61, Annex G
  • Not to be used in the Hot or Cold water distribution system in a dwelling Maximum Service Temperature 140°F
  • Do not use LASCO fittings for compressed air or gases.
  • Do not test PVC piping systems with compressed air or gases.
  • Do not use fittings with liquids not recommended by LASCO
  • Fitting modification voids the warranty.