Background Image

Sch40 Cap
FPT

$0.00 USD

½”L
     

More Details
Part NoSizeCtn QtyCodeList PriceLayer QtyPallet QtyCartons/PalletUPCAUCC
448005448-005½10001/B1$1.364000320003202552871908110025528137165
448007448-007¾10001/B1$1.564000280002802552871909810025528719095
448010448-01015001/B1$2.372000140002802552871910410025528719101
448012448-0122501/B1$2.80100070002802552871911110025528719118
448015448-0152501/B1$2.93100070002802552871912810025528719125
448020448-02021001/B1$5.1840032003202552871913510025528719132
448025448-0252 ½1001/B1$7.6330018001802552871270910025528712706
448030448-03031001/B1$9.9820010001002552876821810025528768215
448040448-0404501/B1$17.531256251252552876822510025528768222
  • ASTM D-1784 - Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly Vinyl Chloride (CPVC) Compounds
  • ASTM D-2466 - Socket Type Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40.
  • ASTM F-1970 - Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride)(PVC) or Chlorinated Poly (Vinyl Chloride)(CPVC) systems.
  • MATERIAL - LASCO Schedule 40 Fittings are produced from PVC Type 1, Cell Classification 12454-B. -O-rings are produced from a Buna- N (Nitrile) material
  • LISTINGS - NSF/ANSI Standard 61, Annex G: Drinking Water System Components Weighted average lead content of less than or equal to 0.25% and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) NSF/ANSI Standard 14: Plastics Piping system components and Related Materials. Includes ANSI Standard 61, Annex G
  • Not to be used in the Hot or Cold water distribution system in a dwelling Maximum Service Temperature 140°F
  • Do not use LASCO fittings for compressed air or gases.
  • Do not test PVC piping systems with compressed air or gases.
  • Do not use fittings with liquids not recommended by LASCO
  • Fitting modification voids the warranty.